- TESA Axial Probes Standard Probes Universal probes for common but constraining applications.
- Measuring bolt mounted on a ball bearing.
- Degree of protection IP65 according to IEC 60529.
- Wide range of accessories including measuring inserts, spring sets, etc.
Access to the measurement is facilitated with the inclinable probe lever, also allowing measurement in two directions. This model is also often used for aligning elements of a machine or a XY table, during installation. Highlights of the probe GT 31: • Automatic reversal of measuring direction • lever's laterally adjustable measuring direction on 180 ° • Coupled with the TESATRONIC TT10 display, the whole set becomes a ultraportable solution.
Typical qualities of TESA inductive probe: excellent repeatability, durability and longevity. All TESA electronic probes are mounted on ball bearings, except for miniature axial probes. The ball bearing guidance system is highly insensitive to radial forces exerted on the measuring rod. An anti-rotation device ensures a perfect movement of the mechanical guiding system. Measuring inserts can be replaced or exchanged. A wide choice of geometrical shapes and sizes are available. The measuring force can be adjusted by changing the spring, depending on the probe model.
Typical qualities of TESA inductive probe: excellent repeatability, durability and longevity • All TESA electronic probes are mounted on ball-bearings, except for miniature axial probes. • The guidance system of ball bearing ensures a very low sensitivity to radial force exerted on the measuring rod. An anti-rotation roller perfect the movement of the mechanical guide. • guides axial sensors are highly protected against penetration of liquids (oil) or solid (dry) by a protective bellows of elastomeric quality. • The inserts (buttons measures) can be replaced or exchanged. A wide choice of geometry, shape and varied size is available • The measuring force can be adjusted by changing the spring, depending on the model probe.
Typical qualities of TESA inductive probe: excellent repeatability, durability and longevity • All TESA inductive axial movement are mounted on a ball bearing, with the exception of miniature models. • The guidance system of ball bearing ensures a very low sensitivity to radial force exerted on the measuring rod. An anti-rotation roller perfect the movement of the mechanical guide. • guides axial sensors are highly protected against penetration of liquids (oil) or solid (dry) by a protective bellows of elastomeric quality. • The inserts (buttons measures) can be replaced or exchanged. A wide choice of geometry, shape and varied size is available • The measuring force can be adjusted by changing the spring, depending on the model probe.
Typical qualities of TESA inductive probe: excellent repeatability, durability and longevity • All TESA inductive axial movement are mounted on a ball bearing, with the exception of miniature models. • The guidance system of ball bearing ensures a very low sensitivity to radial force exerted on the measuring rod. An anti-rotation roller perfect the movement of the mechanical guide. • guides axial sensors are highly protected against penetration of liquids (oil) or solid (dry) by a protective bellows of elastomeric quality. • The inserts (buttons measures) can be replaced or exchanged. A wide choice of geometry, shape and varied size is available • The measuring force can be adjusted by changing the spring, depending on the model probe.
Typical qualities of TESA inductive probe: excellent repeatability, durability and longevity • All TESA inductive axial movement are mounted on a ball bearing, with the exception of miniature models. • The guidance system of ball bearing ensures a very low sensitivity to radial force exerted on the measuring rod. An anti-rotation roller perfect the movement of the mechanical guide. • guides axial sensors are highly protected against penetration of liquids (oil) or solid (dry) by a protective bellows of elastomeric quality. • The inserts (buttons measures) can be replaced or exchanged. A wide choice of geometry, shape and varied size is available • The measuring force can be adjusted by changing the spring, depending on the model probe.
TESA Axial Probes Standard Probes Universal probes for common but constraining applications. • 8 mm diameter probe housing. Can be clamped over its entire length. • Measuring bolt mounted on a ball bearing. • Both the probe housing and ball-bearing guide are separate from one another, so that the measuring bolt moves easily even if the probe is not clamped appropriately. • Degree of protection IP65 according to IEC 60529. • Wide range of accessories including measuring inserts, spring sets, etc. • LVDT probes compatible with measuring equipment from other makers available on request.
Miniature inductive TESA probes are particularly suitable for applications where space around the part to be measured must be the lowest. As an example application, inductive sensors can be mounted on a measuring head for checking bores or when domestic measures. GT41 and 42 provide excellent repeatability of 0.01 for a measuring range of ± 0.3 mm.
Typical qualities of TESA inductive probe: excellent repeatability, durability and longevity • All TESA inductive axial movement are mounted on a ball bearing, with the exception of miniature models. • The guidance system of ball bearing ensures a very low sensitivity to radial force exerted on the measuring rod. An anti-rotation roller perfect the movement of the mechanical guide. • guides axial sensors are highly protected against penetration of liquids (oil) or solid (dry) by a protective bellows of elastomeric quality. • The inserts (buttons measures) can be replaced or exchanged. A wide choice of geometry, shape and varied size is available • The measuring force can be adjusted by changing the spring, depending on the model probe.
Typical qualities of TESA inductive probe: excellent repeatability, durability and longevity • All TESA inductive axial movement are mounted on a ball bearing, with the exception of miniature models. • The guidance system of ball bearing ensures a very low sensitivity to radial force exerted on the measuring rod. An anti-rotation roller perfect the movement of the mechanical guide. • guides axial sensors are highly protected against penetration of liquids (oil) or solid (dry) by a protective bellows of elastomeric quality. • The inserts (buttons measures) can be replaced or exchanged. A wide choice of geometry, shape and varied size is available • The measuring force can be adjusted by changing the spring, depending on the model probe.
Typical qualities of TESA inductive probe: excellent repeatability, durability and longevity • All TESA inductive axial movement are mounted on a ball bearing, with the exception of miniature models. • The guidance system of ball bearing ensures a very low sensitivity to radial force exerted on the measuring rod. An anti-rotation roller perfect the movement of the mechanical guide. • guides axial sensors are highly protected against penetration of liquids (oil) or solid (dry) by a protective bellows of elastomeric quality. • The inserts (buttons measures) can be replaced or exchanged. A wide choice of geometry, shape and varied size is available • The measuring force can be adjusted by changing the spring, depending on the model probe.
Axial probes with measuring bolt mounted on a ball-bearing, with no brand name without TESA logo with a flexible outlet, thanks to the spring steel protects the cable outlet direction while permetant cable as needed. TESA Axial Probes – Serie 490 Probes with no brand name for TESA’s electronic equipment Universal probes to suit common but constraining applications. • 8 mm diameter probe body that can be clamped over its entire length. • Measuring bolt mounted on a ball-bearing. • Probe body made in steel, nickel-plated. • Degree of protection to IP65. • Flexible axial cable exit fitted with a steel spring to prevent the cable from breaking. Other probes compatible with measuring equipment from other makers also available on request.
Access to the measurement is facilitated with the inclinable probe lever, also allowing measurement in two directions. This model is also often used for aligning elements of a machine or a XY table, during installation. Highlights of the probe GT 31: • Automatic reversal of measuring direction • lever's laterally adjustable measuring direction on 180 ° • Coupled with the TESATRONIC TT10 display, the whole set becomes a ultraportable solution.
TESA GT 31 Lever Probes
Models with inclinable probe insert for measuring in two directions – Well suited for use where probes with measuring bolt moving lengthwise can not be conveniently operated.
• Ball-bearing balanced lever.
• Interchangeable probe insert fitted with a tungsten carbide ball tip, inclinable through to 180°.
• Automatic reversal of the probing direction while that of the indication remains unchanged.
• Protected against shocks by 2 safety clutches.
• One-piece housing provided with 2 dovetails.
Miniature inductive TESA probes are particularly suitable for applications where space around the part to be measured must be the lowest. As an example application, inductive sensors can be mounted on a measuring head for checking bores or when domestic measures. GT41 and 42 provide excellent repeatability of 0.01 for a measuring range of ± 0.3 mm.
Universal probes for common but constraining applications.
• 8 mm diameter probe housing. Can be clamped over its entire length.
• Measuring bolt mounted on a ball bearing.
• Both the probe housing and ball-bearing guide are separate from one another, so that the measuring bolt moves easily even if the probe is not clamped appropriately.
• Degree of protection IP65 according to IEC 60529.
• Wide range of accessories including measuring inserts, spring sets, etc.
For more information, please see the TESA corresponding products.